What A Klutz!

Today I decided it was about time to get my figures ready for putting together... I made them all shoulders, made sure they all had a matching pair of hands and feet with footwear (I hate sculpting shoes - feet are easy, but shoes are a pain! lol), and drilled holes ready for the armature...

And that's where it started to go wrong!

My drill is too tiny, so I borrowed hubby's Dremel to drill the holes I needed as it's bigger than mine. 

Firstly, I misjudged how powerful it was, and when drilling, the little arm flew out of my hand, and with the power of the Dremel behind it, shot across the room somewhere. Half an hour of searching, and I finally retrieved the appendage and started again - holding on a lot more tightly this time.

Next mishap... I was holding tightly to "Come Give Grandma A Kiss", when I felt a terrible burning sensation in my fingers... because I had drilled through the side of the arm, and the drill bit was whirring away, burning my hand! 

Darn - what a Klutz I was being today!

I got out some more clay, and added a bit to Grandma's arms... and was so heavy handed as I was trying to mold the clay, I broke off Grandma's thumb, little finger and ring finger! Out with the Liquid Sculpey, and on to trying to fix poor Grammy's hand. I had to do the two fingers first, and whilst that was in the over re-baking, I decided to clear up a little... and 'cleared up' her thumb. An HOUR later, I managed to relocate the missing thumb under my desk, and reattach it with Liquid Sculpey and baking again. The thumb moved. Somewhere between me placing the limb gently in the oven, and getting it out 10 minutes later, the thumb had turned... so now Grammy has severe arthritis in her left hand with her disjointed thumb.

What a palaver!

On the plus side... Grammy has a lovely little pair of lower legs with pink slippers...

Lets hope I can put her together without doing any more damage!

I have to add this... Hopefully Ms Lizzie will put a photograph of her Fred onto her blog soon.

She came for a visit on Sunday, sat down with a lump of clay, and made 'Fred' - her first figurine sculpture, and he is amazing! She's a natural :)

For myself... well, I have had such a lot of fun making Grammy, that I shall probably make a few more to sell - all different and unique - because I don't use molds :)

Copper Boiler

I decided to make a copper-boiler for the scullery - this was basically a pot (not often copper, because it was too expensive - but wrought iron instead) set into a concrete top set on a brick surround, with a fire underneath to heat the water. The water was usually ladled in - and when not needed, ladled out again. This copper boiler was used, obviously, for hot water - but also to cook in (boil and steam), and clean items in (including laundry). There was an 'air space' under the fire grate to allow the heat to circulate, and it was covered with a barrel-top (a circle of wood slats).

In a dairy larder/scullery, the copper boiler was used to heat the milk in when making cheese. Just a little bit of useless information there :)

I started of my boiler with 3 pieces of cardboard and a cut-up egg carton...

I smooched a bit of Liquid Sculpey over the basic carcass when it was built and then cut out some rectangles from Fimo clay. I actually made these rectangles - the 'bricks' - too large, and if I did another, I'd make these bricks a lot smaller. The Liquid Sculpey allowed the bricks to stick to the cardboard. I rolled out a thinner piece to sit over the top and shaped it into the rim of the bowl.

I took a risk making a cardboard carcass, but thought that as Fimo baked at such a low temperature, the cardboard wouldn't have time to burn. The wood glue I used in some of the carcass-making did brown - the paper glue (Scotch Quick Dry) didn't discolour at all.

After baking, I let it cool and then painted it with acrylic paints. After talking to Ms Lizzie, it was decided that whitewashed bricks would be more suitable than red brick.

I daubed the paint on because I'd rather have this effect than try and make everything look absolutely smooth and perfect - because it never does look perfect! The 'insides' of the boiler look a total mess - but nobody will see those when the boiler is installed into the scullery.

I was going to use black paint for the bowl, but changed my mind and used copper - well, it's brass coloured actually, because I didn't have any copper paint.

A small door knob and a hook-and-eye simple latch, and it's all ready - except the copper paint is so thick it will probably take a week to dry lol I have made the wooden top also - but I think it needs... 'tweaking' - so I'll photograph that later.

 I am pleased with how it has turned out - it looks just as good as the bought ones that cost at least £40 - and mine was made up with stuff I already had - and some Fimo oven dry clay that possibly cost less than £3.50.

I will probably do a little more painting, and I have a battery operated red glow light (£3) that I can hide inside the fire grate :)

Okay, so it took me a day to build and make - but still not a bad addition to my dolls house scullery, I think :)